Las Vegas Auto Repair

Race car drivers have demonstrated the advantages of disc brakes, so most modern vehicles use them.  Sometimes just the front wheels have disc brakes, but many vehicles now have them all the way around.  A major component of the disc brake is called a caliper.  It works by squeezing brake pads against the disc or rotor, kind of like a bicycle hand brake.  The brake pads themselves are what contact the rotor, causing friction to build and the wheel to slow down, but it's the calipers that apply the pressure to the pads. Caliper design has evolved over the years, and there are two common types.  One is called a floating caliper.  It has one or two pistons on one side of the disc. When you push down the brake pedal, the piston or pistons in your caliper put pressure on that one side.  A mechanism connected on the other side of the disc applies pressure as well, squeezing your disc so the vehicle stops.  Floating calipers are less expensive since the ... read more

Your vehicle may be like that famous battery bunny, the one that just keeps going and going.  But while it may seem sometimes like you never need to take your vehicle in to be worked on, there are some things you should keep your eyes, ears and nose out for. They are warning you about something that needs attention at your vehicle service facility. If a warning light is on, don't ignore it; do something about it.  There are warning lights for battery, oil, engine heat, tire pressure… you name it.  And the manufacturer put them there for a reason.  They're telling you something isn't normal. So when one goes on, have it checked out soon, especially the blinking Check Engine light.  The earlier you have any warning light issue diagnosed, the more likely you are to avoid a more serious problem. If your vehicle is vibrating or shaking, it's not only annoying, it could signal trouble.  You can bet your vehicle didn't do that when it came out of the fact ... read more

We've all heard that expression, "That's a non starter." When it comes to your vehicle, that's not music to a driver's ears. That sickening sound when you start the ignition and instead of hearing the engine crank, you hear it slowly turn over and your dash lights go dim.  There can be many reasons a vehicle won't start, so here's a little history of how the starter came to be an important component of modern vehicles. You have to move the engine's components to start it. The first cars had a crank that the driver would insert into the front, then start turning things over by hand.  When the engine started, you had to release that crank immediately or risk a broken arm.  Yes, it happened many times.  So, they came up with a better idea: an electric starter, which was a big advance in automotive technology. With this system, an electric motor rotated a series of gears that turned the gasoline engine's crankshaft so its pistons and parts moved and the engine drew in a ... read more

No matter what the weather is like outside, your internal combustion engine expects to keep its cool all the time, even when it's really cold.  That's because engines create the power that moves you to your destination by a series of tiny explosions of a fuel and air mixture. In turn, that generates a lot of heat in a small space. Your vehicle has a complete cooling system with a lot of different parts that work together to keep the temperature at a point where the metal engine parts won't heat up enough to warp.  Its lifeblood is coolant, a liquid that circulates through the engine (and, in most vehicles, the transmission, too) through a series of hoses and tubes.  In order to get rid of the coolant's heat, your vehicle has a part you probably recognize: the radiator.  It does what its name proclaims: radiates heat.  The radiator has a series of thin metal fins that coolant goes through, and when outside air passes over them, the heat is dissipated from the ra ... read more