Las Vegas Auto Repair

When you slow down at stoplight, your vehicle's idle should be smooth as silk.  But what happens when the engine is missing or idling roughly? That's your engine's way of telling you, "Hey, I've got something wrong with me and if you don't get someone to find out what it is, I may not start the next time you turn the key." You can help your service facility if you can describe the problem in detail.  Here's a list of things to make a note of: When is the problem happening, when the engine is cold or when it's been running for a while? Does the rough idling occur when I'm accelerating or when I'm going at a steady speed? Does it happen at high speeds?  Does it happen low speeds? Does it happen at both? Make sure you describe the problem in as much detail because it will help a technician diagnose the problem. One of the first things they'll check is how the spark plugs are firing.  Modern iridium plugs are supposed to last a long, long time.  But they CAN even ... read more

Higher Las Vegas fuel prices aren't going away any time soon. That's not good news for our wallets. A lot of Las Vegas drivers are trying to find ways to cut down on fuel consumption and hang on to some of their hard-earned money.North Americans drive billions of miles less during months of high fuel prices. That's right, billions. Of course NV vehicle owners can't stop driving altogether, so we still need to find other ways to cut fuel bills.Preventive maintenance at Asian Imports Auto in Las Vegas and good vehicle care can actually pay for themselves by lowering our fuel consumption. Here's a real-life example of how that can work.A family planned a four-day camping trip. Before leaving, they took their SUV into Asian Imports Auto for an oil change. They flushed the cooling system, serviced all three differentials and cleaned the fuel system. They replaced the PCV valve and breather element. Then they checked the tires to ensure they had enough ... read more

Most people don't love going to get their vehicle serviced, but it's one of those things you just have to do. So you might as well get the most of out of it. There are some steps you can take that will likely help you get the best results possible. For one thing, it's important to describe your problem (or problems) to the service advisor accurately and clearly. If your vehicle is making a noise, for example, take time to really listen to it and think of the best way to describe it. Does it increase in speed when you go faster? If you feel a vibration somewhere, where in the vehicle does it seem to originate? Some service advisors recommend writing things down. That way the driver won't forget any important clues that could lead to a successful resolution of the problem. Another thing is to make sure your vehicle is cleaned out and free of junk. That way the technician can access those nooks and crannies where some vital components may be. If your vehicle is full of strollers, boxes or ... read more

If you have a front-wheel-drive vehicle, it has components called CV joints which enable you to turn your wheels smoothly. The CV stands for “constant velocity.” In essence, it’s a set of gears that connect a shaft that allows power from the transmission to be sent to the wheels.  When you turn the wheels, no matter what angle, the input velocity rotation will be equal to the output. Thus, the name, CV (constant velocity) joint. Other vehicles with 4-wheel drive and all-wheel drive also use CV joints.   If one of your CV joints isn’t working right, you may find your vehicle difficult to handle.  If one breaks, your vehicle may stop moving.  So, it’s important that CV joints be in top working condition.  The joints need a lot of lubrication, so they are surrounded by grease.  There’s a rubber enclosure around them called the boot which holds the grease in and protects CV joints from the elements. 
 
The bi

... read more

Ever wonder how your vehicle’s transmission is connected to your wheels? After all, when you hit a pothole or some other uneven part of a road’s surface, there has to be something that can maintain the connection between the transmission and the wheel yet keep everything moving at the same speed.  That very cool device is called a CV joint, a kind of driveshaft running to each wheel.  The CV stands for constant velocity because it keeps the drive wheels moving at a constant speed (velocity).  They’re used mostly on front-wheel drive vehicles but also in rear-wheel and all-wheel drive vehicles. The joints move up and down and adjust to bumpy surfaces.  Plus, they are covered in a rubber boot which protects them from road debris and also holds lubrication in.  There’s a CV joint and boot on the transmission side and one on the wheel side.  Unfortunately, the spot that usually fails first is that rubber protective cover (the boot).&nbs ... read more

It’s just common sense that your vehicle will drive better if all the wheels are lined up with each other and the road the way the engineers intended.  When they’re not, that is called being out of alignment.   Here are some signs that your alignment has problems. Your steering wheel isn’t straight when your vehicle goes straight down a straight road. This one’s pretty easy to notice.  If your vehicle’s logo on the wheel is tilted, that’s probably not the way designers wanted it to be. Bring it in and have us check it out. Your steering wheel is vibrating on a smooth road or when you are accelerating.  While this could be caused by several different things, one possibility is misalignment.  If your steering wheel is shaking, it should be examined by a trained technician. Your vehicle is pulling to one side without you wanting it to.  Sometimes the configuration of the road will cause it to pull slightly left or rig ... read more

Seems like these days, we're hearing about more and more electric or hybrid vehicles.  Keep in mind that conventional gasoline internal combustion vehicles have important electrical components, too, and it's important to make sure they're operating at their peak. In a vehicle with a gasoline engine, the part that keeps the battery charged is the alternator.  It converts the mechanical energy created by the engine into electrical power.  To do that, a shaft in the alternator has a pulley on one end that's driven by a belt that is turned by the engine.  A series of magnets then spins around coiled wires and it creates alternating current, or electricity. Your vehicle uses that to charge the battery that, in turn, keeps other electrical components in your vehicle working. Here are a few signs that the alternator isn't doing its job right.  The battery keeps going dead, your instrument panel's battery light is on (it looks like a rectangle with a - and + inside and ... read more

Your vehicle gets its power from burning fuel, usually gasoline, and it counts on something called fuel injectors to send gas to the engine in a spray that is easy to ignite.  It’s a precise operation, and when it’s working well, you have plenty of power and an efficient engine. But after time, contaminants in the fuel system may prevent the injectors from spraying like they’re supposed to.  They can also shoot contaminants into the engine.  One sign that could point to dirty fuel injectors is a misfiring engine. Misfires can be caused by several things, so it’s a good idea to bring your vehicle to us so we can trace the cause. Another sign is that your fuel economy has gone downhill or your engine doesn’t have the “pep” it used to. If we discover that your injectors are clogged or not working the way they should, we can clean them to get rid of those contaminants to restore your engine to its top performance.  When you brin ... read more

If you've ever ridden down a rough road on your bicycle, you know how hard a ride it can be.  Yet drive down the same road in your car, truck or SUV and it miraculously will smooth out the ride.  That's because it is equipped with shock absorbers.  They are built to dampen impacts from road irregularities.  But after taking hundreds of hits from potholes, railroad tracks and curbs, your shock absorbers can wear out.  Besides the rough ride that can cause, there are other ways your vehicle's performance can be affected. When it comes to braking for example, you may take a longer distance to stop.  That's because shocks help keep your tires in contact with the surface of the road.  If the shocks aren't working properly, the tires won't make contact like they should.  So when you slam on the brakes, your vehicle will take longer to stop. Consider what worn out shocks are doing to your tires.  Since the bumps aren't being dampened as much, your ... read more

If you were to name the most important safety feature on your vehicle right now, what would your answer be? A lot of driving experts would agree that it’s your brakes.  Most newer vehicles use a well-engineered and efficient style of brakes called disc brakes.  The name disc brakes comes from one of the components: a disc attached to the wheel hub that is squeezed by parts called calipers.  If you’ve ever ridden a bicycle with hand brakes, you probably have seen how they squeeze against the rim of the bike wheel to stop the bike. It’s similar to the way your vehicle’s calipers squeeze against the disc rotor, with added parts called brake pads attached to the calipers that are what create the friction and stop your vehicle. Here’s why disc brakes need regular maintenance.  Over time, that friction creates wear and tear on the brake pads and the rotors, and you’ll start to see the signs.  Your brakes may have one of the 3 &ldqu ... read more